Anticancer Activity of Au/CNT Nanocomposite Fabricated by Nanosecond Pulsed Laser Ablation Method on Colon and Cervical Cancer.

Gold nanoparticles (AuNPs) and carbon nanotubes (CNTs) are increasingly being investigated for cancer management due to their physicochemical properties, low toxicity, and biocompatibility. This study used an eco-friendly technique (laser synthesis) to fabricate AuNP and Au/CNT nanocomposites. AuNPs, Au/CNTs, and CNTs were tested as potential cancer nanotherapeutics on colorectal carcinoma cells (HCT-116) and cervical cancer cells (HeLa) using a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assay. In addition, the non-cancer embryonic kidney cells HEK-293 were taken as a control in the study. The cell viability assay demonstrated a significant reduction in cancer cell population post 48 h treatments of AuNPs, and Au/CNTs. The average cell viabilities of AuNPs, Au/CNTs, and CNTs for HCT-116 cells were 50.62%, 65.88%, 93.55%, and for HeLa cells, the cell viabilities were 50.88%, 66.51%, 91.73%. The cell viabilities for HEK-293 were 50.44%, 65.80%, 93.20%. Both AuNPs and Au/CNTs showed higher cell toxicity and cell death compared with CNT nanomaterials. The treatment of AuNPs and Au/CNTs showed strong inhibitory action on HCT-116 and HeLa cells. However, the treatment of CNTs did not significantly decrease HCT-116 and HeLa cells, and there was only a minor decrease. The treatment of AuNPs, and Au/CNTs, on normal HEK-293 cells also showed a significant decrease in cell viability, but the treatment of CNTs did not produce a significant decrease in the HEK-293 cells. This study shows that a simplified synthesis technique like laser synthesis for the preparation of high-purity nanomaterials has good efficacy for possible future cancer therapy with minimal toxicity.

Insights of Platinum Drug Interaction with Spinel Magnetic Nanocomposites for Targeted Anti-Cancer Effect.

In nanotherapeutics, gaining insight about the drug interaction with the pore architecture and surface functional groups of nanocarriers is crucial to aid in the development of targeted drug delivery. Manganese ferrite impregnated graphene oxide (MnFe2O4/GO) with a two-dimensional sheet and spherical silica with a three-dimensional interconnected porous structure (MnFe2O4/silica) were evaluated for cisplatin release and cytotoxic effects. Characterization studies revealed the presence of Mn2+ species with a variable spinel cubic phase and superparamagnetic effect. We used first principles calculations to study the physisorption of cisplatin on monodispersed silica and on single- and multi-layered GO. The binding energy of cisplatin on silica and single-layer GO was ~1.5 eV, while it was about double that value for the multilayer GO structure. Moreover, we treated MCF-7 (breast cancer cells) and HFF-1 (human foreskin fibroblast) with our nanocomposites and used the cell viability assay MTT. Both nanocomposites significantly reduced the cell viability. Pt4+ species of cisplatin on the spinel ferrite/silica nanocomposite had a better effect on the cytotoxic capability when compared to GO. The EC50 for MnFe2O4/silica/cisplatin and MnFe2O4/GO/cisplatin on MCF-7 was: 48.43 µg/mL and 85.36 µg/mL, respectively. The EC50 for the same conditions on HFF was: 102.92 µg/mL and 102.21 µg/mL, respectively. In addition, immunofluorescence images using c-caspase 3/7, and TEM analysis indicated that treating cells with these nanocomposites resulted in apoptosis as the major mechanism of cell death.

Role of vanadium ions substitution on spinel MnCo2O4 towards enhanced electrocatalytic activity for hydrogen generation.

Improving efficient electrocatalysts (ECs) for hydrogen generation through water splitting is of significant interest in tackling the upcoming energy crisis. Sustainable hydrogen generation is the primary prerequisite to realizing the future hydrogen economy. This work examines the electrocatalytic activity of hydrothermally prepared vanadium doped MnCo spinel oxide microspheres (MC), MnVxCo2-xO4 (Vx-MnCo MC, where x ≤ 0.4) in the HER (hydrogen evolution reaction) process. Magnetization measurements demonstrated a paramagnetic (at high temperatures) to a ferrimagnetic (at low temperatures) transition below the Curie temperature (Tc) in all the samples. The magnetization is found to intensify with the rising vanadium content of MCs. The optimized catalyst Vx-MnCo MCs (x = 0.3) outperformed other prepared ECs with a Tafel slope of 84 mV/dec, a low onset potential of 78.9 mV, and a low overpotential of 85.9 mV at a current density of 10 mA/cm2, respectively. The significantly improved HER performance of hydrothermally synthesized Vx-MnCo MCs (x = 0.3) is principally attributable to many exposed active sites, accelerated electron transport at the EC/electrolyte interface, and remarkable electron spectroscopy for chemical analysis (ECSA) value was found ~ 11.4 cm2. Moreover, the Vx-MnCo MCs (x = 0.3) electrode exhibited outstanding electrocatalytic stability after exposure to 1000 cyclic voltametric cycles and 36 h of chronoamperometric testing. Our results suggest a feasible route for developing earth-abundant transition metal oxide-based EC as a superior electrode for future water electrolysis applications.

Estimation and Quantification of Toxic Metals in Hugely Consumed Chicken Livers by Advanced Diagnostic Approaches.

Contamination of toxins in chicken's liver is a serious concern for human health owing to related threats of cytotoxicity and general pathologies after their digestion. The quantitative investigations were accomplished by calibration curves plotted for all the detected toxins via typical samples arranged in the known concentrations in the chicken liver's matrix. The chicken liver samples were collected from the Khyber Pakhtunkhwa province of Pakistan and found to contain heavy metals like Cu, Mn, Ni, Pb, and Zn. The analytical estimations were performed under the suppositions of local thermodynamic equilibrium (LTE) in terms of optical thin plasma. The maximum concentrations (parts per million) of Cu, Mn, Ni, Pb, and Zn were as 2.87 ± 0.02 ppm, 7.80 ± 0.13 ppm, 2.84 ± 0.02 ppm, 4.00 ± 0.08, and 83.5 ± 2.10 ppm respectively. Abundance of Cu, and Pb was found considerably beyond the maximum accepted boundary of WHO. Likewise, the level of Ni exceeded the permitted bounds of WHO in samples 01 and 02. To validate our laser-induced breakdown spectroscopy investigation, we approximated the abundance of identical (duplicate) chicken livers through digesting the specimens in suitable solvents by a typical technique such as inductively coupled plasma/optical emission spectrometry (ICP/OES) and the results acquired were in outstanding harmony. Furthermore, the existence of detected toxins was also checked using energy dispersive X-ray spectroscopy (EDX). It is worth stating that larger amounts of Cu, Ni, and Pb in poultry may cause a severe hazard to customers which required security actions and precautions. Our findings are extremely important to make an awareness among the people due to associated health hazards after the digestion of toxins through chicken liver and to protect numerous human lives.

Some Distinct Attributes of ZnO Nanorods Arrays: Effects of Varying Hydrothermal Growth Time.

This study investigates the growth time effect on the structural, morphological, optical, and photoelectrochemical characteristics of highly oriented ZnO nanorod arrays (ZNRAs). The nanorod arrays were grown on ITO substrates using the unified sol-gel spin coating and hydrothermal techniques. ZnO nanoparticles (ZNPs) were synthesized using the sol-gel spin coating method. In contrast, the hydrothermal method was used to grow the ZnO nanorods. The hydrothermal growth time investigated was between 4 and 12 h. The synthesized ZNRAs were used as the photoanode electrodes to investigate their photoelectrochemical (PEC) electrode potency. The as-prepared ZNRAs were characterized using various analytical tools to determine their structures, morphologies, optical, and photoelectrochemical traits. EDX spectra showed the presence of uncontaminated ZnO chemical composition, and FTIR spectra displayed the various functional groups in the samples. A rod-shaped ZnO nanocrystallite with mean lengths and diameters of 300-500 nm and 40-90 nm, respectively, is depicted. HRTEM images indicated the nucleation and growth of ZNRAs with a lattice fringe spacing of 0.26 nm and a growth lattice planer orientation of [002]. The optimum ZNRAs (grown at 8 h) as photoelectrode achieved a photoconversion efficiency of 0.46% and photocurrent density of 0.63 mA/cm2, that was 17 times higher than the one shown by ZNPs with Ag/AgCl as the reference electrode. Both values were higher than those reported in the literature, indicating the prospect of these ZNRAs for photoelectrode applications.

Photoconversion efficiency of In2S3/ZnO core-shell heterostructures nanorod arrays deposited via controlled SILAR cycles.

This paper reports the structures, morphologies, optical properties, and photoconversion efficiency (η%) of the In2S3/ZnO core-shell heterostructures nanorod arrays (IZCSHNRAs) produced via the controlled successive ionic layer absorption and reaction (SILAR) cycles. As-produced samples were characterized using XRD, FESEM, TEM, UV-Vis, PL, XPS and FTIR techniques. The proposed IZCSHNRAs revealed nearly double photocurrent density and η% values compared to the pure ZnO nanorod arrays (ZNRAs). In addition, the light absorption, crystallinity and microstructures of the specimens were appreciably improved with the increase of the SILAR cycles. The deposited nanoparticles of In2S3 (ISNPs) on the ZNRAs surface was responsible for the improvement in the heterostructures, light absorption and photogenerated electron-hole pairs separation, thus enhancing the photoconversion performance. It is established that a simple SILAR approach can be very useful to produce good quality IZCSHNRAs-based photoelectrodes required for the future development of high performance photoelectrochemical cells (PECs).

Rapid Determination and Quantification of Nutritional and Poisonous Metals in Vastly Consumed Ayurvedic Herbal Medicine (Rejuvenator Shilajit) by Humans Using Three Advanced Analytical Techniques.

Shilajit is used commonly as Ayurvedic medicine worldwide which is Rasayana herbo-mineral substance and consumed to restore the energetic balance and to prevent diseases like cognitive disorders and Alzheimer. Locally, Shilajit is applied for patients diagnosed with bone fractures. For safety of the patients, the elemental analysis of Shilajit is imperative to evaluate its nutritional quality as well as contamination from heavy metals. The elemental composition of Shilajit was conducted using three advanced analytical techniques (LIBS, ICP, and EDX). For the comparative studies, the two Shilajit kinds mostly sold globally produced in India and Pakistan were collected. Our main focus is to highlight nutritional eminence and contamination of heavy metals to hinge on Shilajit therapeutic potential. In this work, laser-induced breakdown spectroscopy (LIBS) was applied for qualitative and quantitative analysis of the Shilajit. Our LIBS analysis revealed that Shilajit samples composed of several elements like Ca, S, K, Mg, Al, Na, Sr, Fe, P, Si, Mn, Ba, Zn, Ni, B, Cr, Co, Pb, Cu, As, Hg, Se, and Ti. Indian and Pakistani Shilajits were highly enriched with Ca, S, and K nutrients and contained Al, Sr, Mn, Ba, Zn, Ni, B, Cr, Pb, As, and Hg toxins in amounts that exceeded the standard permissible limit. Even though the content of most elements was comparable among both Shilajits, nutrients, and toxins, in general, were accentuated more in Indian Shilajit with the sole detection of Hg and Ti. The elemental quantification was done using self-developed calibration-free laser-induced breakdown spectroscopy (CF-LIBS) method, and LIBS results are in well agreement with the concentrations determined by standard ICP-OES/MS method. To verify our results by LIBS and ICP-OES/MS techniques, EDX spectroscopy was also conducted which confirmed the presence above mentioned elements. This work is highly significant for creating awareness among people suffering due to overdose of this product and save many human lives.

Development of laser induced breakdown spectroscopy technique to study irrigation water quality impact on nutrients and toxic elements distribution in cultivated soil.

This study is focused mainly on impact of irrigation water quality in cultivated soil on distribution of essentials nutrients (Al, Mg, Ca, Fe, S, Si, Na, P, and K) and relatively toxic metals (As, Ba, Cr, Cu, Ti, Sn, Mn, Ni, and Zn) using an elegant Laser induced breakdown spectroscopy (LIBS) technique. A pulsed Nd:YAG laser operating at 1064 nm in conjunction with suitable detector was applied to record soil emission spectra. The abundance of these elements were evaluated via standard calibration curve Laser Induced Breakdown Spectroscopy (CC-LIBS) and calibration free Laser Induced Breakdown Spectroscopy (CF-LIBS) approaches. Quantitative analyses were accomplished under conjecture of local thermodynamic equilibrium (L.T.E) and optically thin plasma. The average electron temperatures were estimated by Boltzmann plot method for cultivated soil samples in 7800 to 9300 K range. The electron number density was ~ 1.11 × 1017 cm - 3 to 1.60 × 1017 cm - 3. Prior to application on soil samples, the experimental setup was optimized at the following parameters: pulsed energy = 60 mJpulse-1, sample to lens distance of 9.0 cm, and the gate delay of 3.5 µs. It is noteworthy that nutritional elements content of cultivated soils were found strongly dependent upon the irrigation water quality. The cultivated soil from industrial area was found rich of toxins while the cultivated land using tube well water contains toxins in least amount. Our LIBS findings were also validated by comparing its results with contents measured using a standard inductively coupled plasma optical emission spectroscopy (ICP-OES) method and both were found in excellent agreement. The present study could be highly beneficial for agricultural applications and for farmers to produce safe food products and higher crops yield.

Features of structure, magnetic state and electrodynamic performance of SrFe12-xInxO19.

Indium-substituted strontium hexaferrites were prepared by the conventional solid-phase reaction method. Neutron diffraction patterns were obtained at room temperature and analyzed using the Rietveld methods. A linear dependence of the unit cell parameters is found. In3+ cations are located mainly in octahedral positions of 4fVI and 12 k. The average crystallite size varies within 0.84-0.65 µm. With increasing substitution, the TC Curie temperature decreases monotonically down to ~ 520 K. ZFC and FC measurements showed a frustrated state. Upon substitution, the average and maximum sizes of ferrimagnetic clusters change in the opposite direction. The Mr remanent magnetization decreases down to ~ 20.2 emu/g at room temperature. The Ms spontaneous magnetization and the keff effective magnetocrystalline anisotropy constant are determined. With increasing substitution, the maximum of the ε/ real part of permittivity decreases in magnitude from ~ 3.3 to ~ 1.9 and shifts towards low frequencies from ~ 45.5 GHz to ~ 37.4 GHz. The maximum of the tg(α) dielectric loss tangent decreases from ~ 1.0 to ~ 0.7 and shifts towards low frequencies from ~ 40.6 GHz to ~ 37.3 GHz. The low-frequency maximum of the µ/ real part of permeability decreases from ~ 1.8 to ~ 0.9 and slightly shifts towards high frequencies up to ~ 34.7 GHz. The maximum of the tg(δ) magnetic loss tangent decreases from ~ 0.7 to ~ 0.5 and shifts slightly towards low frequencies from ~ 40.5 GHz to ~ 37.7 GHz. The discussion of microwave properties is based on the saturation magnetization, natural ferromagnetic resonance and dielectric polarization types.

Sol-Gel Synthesis of Dy-Substituted Ni0.4Cu0.2Zn0.4(Fe2-xDyx)O4 Nano Spinel Ferrites and Evaluation of Their Antibacterial, Antifungal, Antibiofilm and Anticancer Potentialities for Biomedical Application.

BACKGROUND: The constant rise of microbial biofilm formation and drug resistance to existing antimicrobial drugs poses a significant threat to community health around the world because it reduces the efficacy and efficiency of treatments, increasing morbidity, mortality, and health-care expenditures. As a result, there is an urgent need to develop novel antimicrobial agents that inhibit microbial biofilm formation. METHODS: The [Ni0.4Cu0.2Zn0.4](Fe2-xDyx)O4(x≤0.04) (Ni-Cu-Zn) nano spinel ferrites (NSFs) have been synthesized by the sol-gel auto-combustion process and were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive x-ray (EDX) and transmission electron microscopy (TEM). The antimicrobial, antibiofilm and antiproliferative activities of Ni-Cu-Zn NSFs were also examined. RESULTS: The XRD pattern confirms the secondary phase DyFeO3 and Fe2O3 for substituted Dy3 + samples, and the crystallite size ranged from 10 to 19 nm. TEM analysis of NSFs revealed that the particles were cube-shaped and 15nm in size. NSFs exhibited significant antimicrobial, antibiofilm and antiproliferative activity. At concentration of 1 mg/mL, it was found that the NSFs (ie, x=0.0, x=0.01, x=0.02, x=0.03 and x=0.04) inhibit biofilm formation by 27.6, 26.2, 58.5, 33.3 and 25% for methicillin-resistant Staphylococcus aureus (MRSA) and 47.5, 43.5, 48.6, 58.3 and 26.6% for Candida albicans, respectively. SEM images demonstrate that treating MRSA and C. albicans biofilms with NSFs significantly reduces cell adhesion, colonization and destruction of biofilm architecture and extracellular polymeric substances matrices. Additionally, SEM and TEM examination revealed that NSFs extensively damaged the cell walls and membranes of MRSA and C. albicans. Huge ultrastructural alteration such as deformation, disintegration and separation of cell wall and membrane from the cells was observed, indicating significant loss of membrane integrity, which eventually led to cell death. Furthermore, it was observed that NSF inhibited the cancer cell growth and proliferation of HCT-116 in a dose-dependent manner. CONCLUSION: The current study demonstrated that the synthesized Ni-Cu-Zn NSFs could be used to develop potential antimicrobial surface coatings agents for a varieties of biomedical-related materials and devices in order to prevent the biofilms formation and their colonization. Furthermore, the enhanced antiproliferative properties of manufactured SNFs suggest a wide range of biomedical applications.

Nutritional and toxic elemental analysis of dry fruits using laser induced breakdown spectroscopy (LIBS) and inductively coupled plasma atomic emission spectrometry (ICP-AES).

Quantitative investigation of essential and trace heavy elements present in health-beneficial dry fruits (Pistachio, Almonds, Black walnut, White walnut, and Cashew) was investigated using Laser Induced Breakdown Spectroscopy. For an accurate elemental exposure using LIBS technique, the local thermo-dynamical equilibrium of the laser induced plasma was established and verified using McWhirter criterion based on the electron number density in the plasma. Earlier to engage, our LIBS detector was optimized. For quantification of elements, standard calibration curves (CC)-LIBS method was applied. Using our LIBS system, the nutritional elements such as Al, Mg, Ca, Fe, K, Zn, and Na and toxins like Pb, Cr, and Cu were detected in dry fruits. The elemental quantification of dry fruit contents were validated using standard (ICP-AES) method and the relative accuracy of our experimental setup in comparison to ICP approach was in the ranging from 0.1 to 0.3 at 2.5-% error confidence.

Synthesis of niobium substituted cobalt-nickel nano-ferrite (Co0.5Ni0.5NbxFe2-xO4 (x ≤ 0.1) by hydrothermal approach show strong anti-colon cancer activities.

The combination of two or more nanoparticles found to be effective strategy to synthesize nanocomposites for better drug delivery and treatment. In the present study, we have combined cobalt (Co), nickel (Ni), niobium (Nb), and iron oxide (Fe2O4) and prepared niobium substituted cobalt-nickel nano-ferrite nanocomposites (Co0.5Ni0.5NbxFe2-xO4 (x ≤ 0.1) by using hydrothermal approach. We have characterized the structure and morphology of nanocomposites by using XRD, EDX, TEM and SEM methodologies. We have examined the impact of nanocomposites (Co0.5Ni0.5NbxFe2-xO4 (x ≤ 0.1) on cancerous cells (human colorectal carcinoma cells, HCT-116) by using MTT assay. We have also checked the impact of nanocomposites on normal and non-cancerous cells (human embryonic kidney cells, HEK-293) to confirm the specificity of their actions. Post- 48 h treatment of Co0.5Ni0.5NbxFe2-xO4 (x ≤ 0.1) led to dose-dependent inhibition of cancer cells growth and proliferation. However, no cytotoxic effect was observed on the normal cells (HEK-293). In addition, DAPI stained nuclear DNA staining analysis demonstrates that the Co0.5Ni0.5NbxFe2-xO4 (x ≤ 0.1) treatment also caused nuclear DNA disintegration which is the marker for programmed cell death. These results demonstrate that synthesized nanocomposites Co0.5Ni0.5NbxFe2-xO4 (x ≤ 0.1) selectively target the colon cancer cells and induce cancer cell death.Communicated by Ramaswamy H. Sarma.

Synthesis of Ni0.5Co0.5-xCdxFe1.78Nd0.02O4 (x ≤ 0.25) nanofibers by using electrospinning technique induce anti-cancer and anti-bacterial activities.

Here we report the electrospinning synthesis of Cd-substituted Ni-Co ferrite Ni0.5Co0.5-xCdxFe1.78Nd0.02O4 (x ≤ 0.25) nanofiber (NFs) with a very low concentration of Nd as a dopant. The structure and surface morphology of the Ni0.5Co0.5-xCdxFe1.78Nd0.02O4 (x ≤ 0.25) NFs were analyzed by X-ray powder pattern (XRD), transmission and scanning electron microscopes (TEM) along with Energy-dispersive X-ray (EDX). We have examined the biological applications of the Ni0.5Co0.5-xCdxFe1.78Nd0.02O4 (x ≤ 0.25) NFs on both cancerous cells and bacterial cells. We have found that Ni0.5Co0.5-xCdxFe1.78Nd0.02O4 (x ≤ 0.25) NFs produced inhibitory action on the human colorectal carcinoma cells (HEK-293) and also showed inhibitory action on the bacterial strains (S. aureus and E. coli) respectively. Finally, this is the first report on the synthesis of Cd- substituted Co-Ni ferrite nanofibers using electrospinning technique exhibiting anti-cancer and anti-bacterial activities.Communicated by Ramaswamy H. Sarma.

Exploring the influence of varying pH on structural, electro-optical, magnetic and photo-Fenton properties of mesoporous ZnFe2O4 nanocrystals.

An economically viable and superficial technique was indorsed to yield ZnFe2O4 nanocrystals in the system to investigate the impact of pH variation on the optical, structural, electrical, and magnetic properties of as-prepared nanocrystals. The as-synthesized ZnFe2O4 nanocrystals were premeditated with the application protracted to degradation of Methylene blue organic dye. The results specify that the pH plays the utmost decisive facet in photo-Fenton recital. From XRD (X-Ray diffraction) analyses, it was confirmed that as-synthesized nanocrystals belong to a cubic Fd3m crystal phase. The crystallite size was also determined by the Scherrer formula and it was noticed that as the pH rises the crystallite size also increased. FT-IR (Fourier Transform Infrared) analysis depicts two absorption peaks âˆ¼ 500 and ∼600 cm-1 that represents tetrahedral (Td) and octahedral (Oh) sites. Using TEM (Transmission Electron Microscopy), the morphology was observed to be spherical particles with some agglomeration. Photoluminescence and UV-visible spectral studies were performed to investigate the optical properties. The bandgap energy was seen to decrease as the pH increased. Using BET analysis, the surface area for the as-synthesized samples was found to decrease on increasing the pH. The reaction results showed that the ZnFe2O4 has good photocatalytic activity, which can be attributed to high surface area and pore volume, and large pore size. The ZnFe2O4 produced by the co-precipitation route exhibited promising photocatalytic activity for the removal of textile dye, reaching nearly 99.2% of decolorization at 100 min. Therefore, ZnFe2O4 particles rapidly prepared by the co-precipitation route have the potential for use in treatment of textile wastewater by the heterogeneous photo-Fenton process. With the help of VSM analysis, the coercivity and other magnetic properties were determined for the as-synthesized nanocrystal with plays a significant role in photocatalytic recyclability, which intends to premediate that the prepared nanocrystals can be used in industrial persistence.

Synthesis of Dy-Y co-substituted manganese­zinc spinel nanoferrites induced anti-bacterial and anti-cancer activities: Comparison between sonochemical and sol-gel auto-combustion methods.

This study described the beneficial properties of ultrasonic irradiation approach to synthesize the spinel-type Dy-Y co-substituted Mn-Zn nanospinel ferrites (NSFs). We have used two different approaches like citrate sol-gel combustion and ultrasonic irradiation routes to produced series of Mn0.5Zn0.5Fe2-2x(DyxYx)O4 (0.0 ≤ x ≤ 0.05) NSFs (DyY-MnZn NSFs). The structure and morphology of NSFs X-was examined by using XRD, EDX, SEM and TEM methods. We have found that spinel ferrites and hematite phase in DyY-MnZn NSFs produced by citrate sol-gel, while DyY-MnZn NSFs created by ultrasonic irradiation contain a pure phase of spinel ferrite. TEM analysis revealed the spherical nanoparticles with fairly uniform size. We have also analyzed the biological applications of DyY-MnZn NSFs prepared by both methods (ultrasonication and sol-gel) by examining their anti-cancer and anti-bacterial (Escherichia coli and Staphylococcus aureu) activities. We have found that both methods produced inhibitory actions on colon cancer cells (HCT-116) and bacterial cells, whereas, no inhibitory action was observed when examined on normal and non-cancerous cells (HEK-293).

Spectral analysis of Miracle Moringa tree leaves using X-ray photoelectron, laser induced breakdown and inductively coupled plasma -optical emission spectroscopic techniques.

The antioxidant Moringa oleifera (a medicinal plant) leaves (MOLs) containing diverse nutrients are highly beneficial for the human health. The MOLs upon consumption can lower the blood sugar, cure the heart diseases, and reduce the inflammation. In this perception, the "primary nutrients contents" in the dry MOLs (pellet samples) were evaluated for the first time using the XPS, LIBS and ICP-OES techniques. The XPS analysis of the MOLs showed the presence of vital elements like calcium (Ca), magnesium (Mg), manganese (Mn), copper (Cu), phosphorous (P), sulfur (S) and zinc (Zn). The LIBS analyses of the MOLs revealed the atomic and ionic spectral lines corresponding to the essential nutrients such as the Ca, Na, K, Fe, Mg, Mn, Cu, P, S and Zn. The calibration free LIBS algorithm (CF-LIBSA) was developed to quantify the content of each element in the dry MOLs. In addition, the LIBS results were validated by the analysis using ICP-OES standard analytical technique. The elemental contents in the MOLs obtained from the CF-LIBS analyses were counter verified by the ICP-OES results. Present results are highly valuable for the development of a traditional herbal medicine using the miracle MOLs.

Synthesis and biological characterization of Mn0.5Zn0.5EuxDyxFe1.8-2xO4 nanoparticles by sonochemical approach.

Metallic nanoparticles (NPs) possess unique properties which makes them attractive candidates for various applications especially in field of experimental medicine and drug delivery. Many approaches were developed to synthesize divers and customized metallic NPs that can be useful in many areas such as, experimental medicine, drug design, drug delivery, electrical and electronic engineering, electrochemical sensors, and biochemical sensors. Among different metallic nanoparticles, manganese (Mn) NPs are the most prominent materials, in the present study, we have synthetized unique Mn0.5Zn0.5DyxEuxFe1.8-2xO4 NPs by using ultrasonication method (x ≤ 0.1). The structure, and surface morphology of Mn0.5Zn0.5DyxEuxFe1.8-2xO4 NPs was characterized by XRD, SEM, TEM and EDX methods. We have examined the biological effects of Mn0.5Zn0.5DyxEuxFe1.8-2xO4 NPs on both normal (HEK-293) and cancerous (HCT-116) cells. We have found that the treatment of Mn0.5Zn0.5DyxEuxFe1.8-2xO4 NPs post 48 h, showed significant decline in cancer cells population as revealed by MTT assay. The IC50 value of Mn0.5Zn0.5DyxEuxFe1.8-2xO4 NPs was ranged between (2.35 µg/mL to 2.33 µg/mL). To check the specificity of the actions, we found that the treatment of Mn0.5Zn0.5DyxEuxFe1.8-2xO4 NPs did not produce any effects on the normal cells, which suggest that Mn0.5Zn0.5DyxEuxFe1.8-2xO4 NPs selectively targeted the cancerous cells. The anti-bacterial properties of Mn0.5Zn0.5DyxEuxFe1.8-2xO4 NPs were also evaluated by MIC and MBC assays. We suggest that Mn0.5Zn0.5DyxEuxFe1.8-2xO4 NPs produced by sonochemical method possess potential anti-cancer and anti-bacterial capabilities.

Determination of heavy metals in cancerous and healthy colon tissues using laser induced breakdown spectroscopy and its cross-validation with ICP-AES method.

Certain types of cancer deaths are widespread due to the diagnostic complexities at the early stages. Recent studies revealed that the bio-accumulated heavy metals (act as pro-carcinogens) in the human colon cause strong interactions with the nuclear proteins, leading to the DNA damages and repair processes inhibition, resulting in the cancers. Most of the conventional detection techniques suffer from the insensitiveness, cost-intensiveness, imprecision, slowness, cumbersomeness of sample preparation, and conflicting outcomes. To surmount these shortcomings an accurate, reliable, and rapid detection technique is essential for the early diagnostic and prevention of heavy metals accumulation induced colon cancers. This will enable not only to classify the malignant and non-malignant cells but can differentiate the proteins from abnormal cellular morphology. Using the indigenously developed fast and accurate (calibration-free) laser-induced breakdown spectroscopy (LIBS), we analyzed several cancerous and normal colon tissues collected from the colon cancer infected patients aged 40-60 years. The results showed the presence of carcinogenic heavy metals including lead (Pb), chromium (Cr), and mercury (Hg) in the malignant colon tissues, while the healthy tissues were devoid of these elements. The concentrations of Pb, Cr and Hg in the cancerous samples were discerned to be 3.1, 13.4 and 7.1 µg/L, respectively. Furthermore, the performance accuracy of the LIBS technique was validated by comparing the results obtained from the standard inductively coupled plasma atomic emission spectroscopy (ICP-OES). It was established that the LIBS analysis is useful for the speedy, precise and early detection of the heavy metals amassed malignant colon tissues, thereby saving millions of lives by promoting the chances for cancer cure.

Peculiarities of the microwave properties of hard-soft functional composites SrTb0.01Tm0.01Fe11.98O19-AFe2O4 (A = Co, Ni, Zn, Cu, or Mn).

Herein, we investigated the correlation between the chemical composition, microstructure, and microwave properties of composites based on lightly Tb/Tm-doped Sr-hexaferrites (SrTb0.01Tm0.01Fe11.98O19) and spinel ferrites (AFe2O4, A = Co, Ni, Zn, Cu, or Mn), which were fabricated by a one-pot citrate sol-gel method. Powder XRD patterns of products confirmed the presence of pure hexaferrite and spinel phases. Microstructural analysis was performed based on SEM images. The average grain size for each phase in the prepared composites was calculated. Comprehensive investigations of dielectric properties (real (ε') and imaginary parts (ε'') of permittivity, dielectric loss tangent (tan(δ)), and AC conductivity) were performed in the 1-3 × 106 Hz frequency range at 20-120 °C. Frequency dependency of microwave properties were investigated using the coaxial method in frequency range of 2-18 GHz. The non-linear behavior of the main microwave properties with a change in composition may be due to the influence of the soft magnetic phase. It was found that Mn- and Ni-spinel ferrites achieved the strongest electromagnetic absorption. This may be due to differences in the structures of the electron shell and the radii of the A-site ions in the spinel phase. It was discovered that the ionic polarization transformed into the dipole polarization.

A study on the spectral, microstructural, and magnetic properties of Eu-Nd double-substituted Ba0.5Sr0.5Fe12O19 hexaferrites synthesized by an ultrasonic-assisted approach.

In this study, an examination on the spectral, microstructural, and magnetic characteristics of Eu-Nd double-substituted Ba0.5Sr0.5Fe12O19 hexaferrites (Ba0.5Sr0.5NdxEuxFe12-2xO19 (x = 0.00-0.05) HFs) fabricated by an ultrasonic-assisted approach has been presented. An UZ SONOPULS HD 2070 ultrasonic homogenizer with frequency of 20 kHz and power of 70 W was used. The chemical bonding, structure and the morphology of the products were evaluated by Fourier-Transform Infrared (FT-IR) Spectroscopy, XRD (X-ray diffraction), scanning and transmission electron microscopy and techniques. The textural properties of the prepared nanomaterials were examined by using the Brunauer-Emmett-Teller (BET) method. The magnetic properties were studied using a vibrating sample magnetometer (VSM) at room temperature (RT) and low temperature 10 K. The magnitudes of various magnetic parameters including Ms (saturation magnetization), Mr (remanence) and Hc (coercivity) were estimated and evaluated. The M-H loops revealed the hard ferrimagnetic nature for all products at both temperatures. The Ms and Mr values showed a decreasing tendency with increasing degree of Eu3+ and Nd3+ substitutions whereas Hc values displayed an increasing trend. At RT, Ms, Mr and Hc values lie in the ranges of 63.0-68.8 emu·g-1, 24.6-39.2 emu·g-1 and 2252.4-2782.1 Oe, respectively. At 10 K, the values of Ms, Mr and Hc lie between 87.5-97.1 emu·g-1, 33.5-40.1 emu·g-1 and 2060.6-2417.2 Oe, respectively. The observed magnetic properties make the prepared products promising candidates to be applied in the recording media.